24" Series X G1 Optical Bonded

TFT Technology:
• High Quality TFT with LED Backlight
• 24.0 inch viewable image size, Widescreen, Aspect Ratio 16:9
• TFT active-matrix liquid crystal panel, RGB vertical stripe
• MVA (Multi-domain Vertical Alignment) LCD Technology

TFT Characteristics:
• Native Resolution : 1920 x 1080 (FHD)
• Pixel Pitch (RGB) : 0.276 (H) x 0.276 (V) mm
• Response Time : 25 ms (typical), "black” to “white"
• Contrast Ratio : 3000:1 (typical)
• Light Intensity : 300 cd/m² (typical)
• Viewable Angle : +/- 89 deg. (typical) (Up/Down/Left/Right)
• Active Display Area : 531.36 (H) x 298.89 (V) mm
• Max Colors : 16.7 million

Supported Signals:
Resolutions:
• VGA : 640 x 480 (including 640 x 350)
• SVGA : 800 x 600 (including 720 x 400)
• XGA : 1024 x 768
• SXGA : 1280 x 1024
• UXGA : 1600 x 1200
• FHD : 1920 x 1080*
• WUXGA : 1920 x 1200
* Recommended for optimal picture quality Note: Other resolutions will be scaled full screen, unit has no scaling support

Power Specifications:
Multi-power Supply:
• 115&230VAC - 50/60Hz + 24 VDC - HD 24T21 STD-Mxx-Fxxx
Note: You may connect either AC power or DC power or both. In case both sources are connected, power will be sourced from the AC input. If AC input is lost, there will be a uninterrupted switch-over to DC input.
Power Consumption:
• Operating AC/DC: 40W (typ) - 125W (max)

Physical Considerations:
• W:593.00 [23.35''] x H:384.00 [15.12''] x D:70.00 [2.76''] mm [inch]
• 4 x M6 VESA mounting 280x150mm, Max 12mm deep
• Weight: 10.1kg / 22.2lbs

Signal Terminals:
• DVI-D Signal IN : 1 x 24p DVI (female)
• RGB Signal IN : 1 x 15p HD D-SUB (female)
• SCOM RS-422/485 : 1 x 5-pin Terminal Block 3.81, non-isolated+Buzzer
• SCOM RS-232 : 1 x 9p D-SUB (female) non-isolated+Buzzer
• If Touchscreen : 1 x USB TYPE B Connector (female)
• AC Power IN : 1 x Std IEC Inlet
• DC Power IN : 1 x 2-pin Terminal Block 5.08

User Controls:
Behind front bezel - Glass Display Control™ (GDC) IP66:
• Power On/Off, On Screen Display Menu, Brightness Control (-/+)
• Mode Status Indicators (ECDIS, Service)
• Buzzer (not visible), Light Sensor (not visible)

Environmental Considerations:
• Operating : Temperature -15 deg. C to +55 deg. C Humidity up to 95%
• Storage : Temperature -20 deg. C to +60 deg. C Humidity up to 95%
• IP Rating : Protection: IP66 front – IP22 rear (EN60529)
Lifetime Considerations:
Even though the test conditions for bridge units provide for a maximum operating temperature of 55°C, continuous operation of all electronic components should, if possible, take place at ambient temperatures of only 25°C. This is a necessary prerequisite for long life and low service costs.

Factory Options:
• Optical Bonding Technology