Actisense NDC-5 Multiplexer Ny

Actisense NDC-5 Multiplexer

The NDC-5 is more than just an NMEA 0183 Combiner/ Multiplexer; it provides an installer with a highly flexible platform that can be used to solve many NMEA 0183 interconnectivity headaches.

Powerful routing allows any of the inputs to be routed to any output, combining data if required. Advanced features allow data rate conversion, auto-switching and advanced sentence-based routing and blocking.

Mer detaljer

NDC-5
Ny produkt

5 190 SEK

Webblager

- +

 
Mer information

FEATURES

  • 5 OPTO-Isolated NMEA 0183 inputs
  • 2 ISO-Drive NMEA 0183 outputs
  • Dedicated bi-directional Serial port (fully isolated utiising ISO-Drive technology)
  • Serial port can be used as additional input / output
  • Ethernet port supports direct and network connection
  • Configurable input and output baud rates
  • Allows Data combining and rate conversion
  • 2 independent Autoswitch virtual inputs with priority
  • Isolation to battery supply
  • Diagnostic LED’s
  • IP65 rated Polycarbonate housing
  • Optional DIN rail mount

BENEFITS

  • Quick and easy to install
  • Configuration using standard web browser, no PC operating system compatibility issues
  • Advanced features solve NMEA 0183 data routing problems
  • Fully isolated with ISO-Drive technology for peace of mind
  • Easy firmware updates make the device future-proof
 
Specifikationer
Power Supply
Input supply voltage 9 to 35 V DC
Input supply current 110mA max @ 12V DC (all outputs @ full drive into 100 ohm loads)
Input protection Continuous reverse polarity, transient overvoltage and ESD protection
Power indicator LED, Blue – indicates unit is functioning correctly
 

 

NMEA 0183 Port – Listener & Talker
Number of Listener / input ports 5 isolated NMEA 0183 Listeners
Number of Talker / output ports 2 isolated NMEA 0183 Talkers
Compatibility Fully NMEA 0183, RS422 & RS232 compatible. RS485 Listener compatible
Electrical isolation 2500 V input to ground, 1500 V output to ground using ISO-Drive™
Speed / baud rate In1 to In4: up to 38400 bps In5: 4800 bps Out1: up to 115200 bps Out2: up to 38400 bps
Talker output voltage drive >= 2.1V (differential) into 100 ohm
Talker output current drive 20 mA maximum per output
Talker output protection Short circuit and ESD
Listener input voltage tolerance -15 V to +15 V continuous, -35 V to +35 V short term (< 1 second)
Listener input protection Current limited, overdrive protection to 40 VDC and ESD protection
Listener data indicator LED, Green (Flashes to indicate valid input)
Status indicator LED, Green / Yellow / Red to indicate status (see user manual)
 

 

Serial Port
Number of input ports 1 isolated input
Number of output ports 1 isolated output
Compatibility RS422 & RS232 compatible. RS485 Listener compatible
Electrical isolation 2500 V input to ground 1500 V output to ground using ISO-Drive™
Speed / baud rate 115200 bps
Output voltage drive >= 2.1V (differential) into 100 ohm
Output current drive 20 mA max.
Output protection Short circuit and ESD
Input voltage tolerance -15 V to +15 V continuous, -35 V to +35 V short term (< 1 second)
Input protection Current limited, overdrive protection to 40 VDC and ESD protection
 

 

Ethernet Port
Host interface 10/100BaseT, automatic polarity detection
Supported protocols TCP/IP for configuration and firmware updating
TCP/IP and UDP for NMEA 0183 comms
Connector RJ45
Electrical isolation 2kV
Indicators Green – Link, Yellow – 100 Mbps
Mode Inputs
Input voltage range 0 to 35V DC
Protection Transient overvoltage and ESD protection
 

 

Alarm Output
Contacts Normally open and normally closed*
Electrical isolation 1000V between power supply and contacts
Alarm indicator LED, red indicates a valid alarm condition
 

 

Mechanical
Housing material Polycarbonate
Protective Lid Material Polycarbonate
Sealing Material Expanded silicone foam gasket, closed cell polyurethane splash guard and ePTFE waterproof vent
Dimensions 127mm (L) x 106mm (W) x 48mm (H)
Weight 230g including screw terminals and RJ45 cap
Mounting 4 x 3.5mm lugs to allow panel mount with self tapping screws (included), optional DIN rail mount available on request.
Compass safe distance TBD
Wiring terminals Pluggable 2/3 way screw terminal, 3.5mm pitch, 14 to 30 AWG
 

 

Approvals and Certifications
EMC IEC 60945 (sections 9 & 10)
CE 2014/30/EU
Environmental protection IP65
Operating temperature -15°C to +55°C
Storage temperature -40°C to +85°C
Relative Humidity (RH) 0 – 80% RH
Guarantee

 

3 years

Tillbehör

2 andra produkter i samma kategori: